From idea to market-ready product, our NPI solutions make every stage easier, faster. Discover How We Help
| Mechanical Properties | Ultimate Tensile Strength | 25–55 MPa |
| Yield Strength | N/A (depends on formulation) | |
| Hardness | 70–95 Shore A (elastomers), up to 75 Shore D (rigid) | |
| Elongation at Break | 300–600% | |
| Flexural Strength | 20–50 MPa | |
| Modulus of Elasticity | 10–80 MPa (elastomers), up to 0.7 GPa (rigid) | |
| Wear Resistance | Excellent | |
| Machinability | Good (depends on hardness) | |
| Physical Properties | Density | 1.1–1.25 g/cm³ |
| Impact Strength | High (excellent resilience) | |
| Moisture Absorption | Moderate (sensitive to humidity) | |
| Friction Coefficient | 0.4–0.6 | |
| Thermal Properties | Maximum Service Temperature | 80–90°C (elastomers), up to 120°C (rigid) |
| Thermal Expansion Coefficient | 150–200 ×10⁻⁶/°C | |
| Thermal Conductivity | 0.2–0.3 W/(m·°C) | |
| Electrical Properties | Dielectric Strength | Good |
| Electrical Resistivity | 10¹¹–10¹³ Ω·cm | |
| Special Properties | UV Resistance | Poor (requires stabilizers) |
| Creep Resistance | Moderate | |
| Recyclability | Limited (depends on type, thermoset vs. thermoplastic) |
